Beach sand mycobiome: The silent threat of pathogenic fungi and toxic metal contamination for beachgoers.

Emphasis is always placed on bacterial but not fungal pathogens in marine environments. We analysed the fungal diversity, functional predictions, and toxic metals and metalloids contamination in beach sand from different South African locations. Results revealed a diverse fungal community, with Ascomycota, Rozellomycota, and Basidiomycota being the dominant phyla. Functional predictions highlighted fungal metabolic pathways related to of carbohydrates, amino acids, and lipids, in different beach samples. Elevated concentrations of toxic metals and metalloids were detected in Central and Harbour beach sands, likely due to anthropogenic activities. Correlations among different elements were observed, suggesting complex interactions in the coastal environment. Fungal pathogens like Cladosporium, Fusarium, Aspergillus, and Candida in beach sands raise potential public health risk concerns. Therefore, monitoring fungal diversity (including pathogens) alongside bacterial contamination in beach environments is imperative. The results contribute to understanding fungal community dynamics, functional potential, toxic metal and metalloid contamination, and potential risks associated with beach sand ecosystems.

Evolution and Emergence of Antibiotic Resistance in Given Ecosystems: Possible Strategies for Addressing the Challenge of Antibiotic Resistance.

Antibiotics were once considered the magic bullet for all human infections. However, their success was short-lived, and today, microorganisms have become resistant to almost all known antimicrobials. The most recent decade of the 20th and the beginning of the 21st century have witnessed the emergence and spread of antibiotic resistance (ABR) in different pathogenic microorganisms worldwide. Therefore, this narrative review examined the history of antibiotics and the ecological roles of antibiotics, and their resistance. The evolution of bacterial antibiotic resistance in different environments, including aquatic and terrestrial ecosystems, and modern tools used for the identification were addressed. Finally, the review addressed the ecotoxicological impact of antibiotic-resistant bacteria and public health concerns and concluded with possible strategies for addressing the ABR challenge. The information provided in this review will enhance our understanding of ABR and its implications for human, animal, and environmental health. Understanding the environmental dimension will also strengthen the need to prevent pollution as the factors influencing ABR in this setting are more than just antibiotics but involve others like heavy metals and biocides, usually not considered when studying ABR.

Taxonomic and Functional Distribution of Bacterial Communities in Domestic and Hospital Wastewater System: Implications for Public and Environmental Health.

The discharge of untreated hospital and domestic wastewater into receiving water bodies is still a prevalent practice in developing countries. Unfortunately, because of an ever-increasing population of people who are perennially under medication, these wastewaters contain residues of antibiotics and other antimicrobials as well as microbial shedding, the direct and indirect effects of which include the dissemination of antibiotic resistance genes and an increase in the evolution of antibiotic-resistant bacteria that pose a threat to public and environmental health. This study assessed the taxonomic and functional profiles of bacterial communities, as well as the antibiotic concentrations in untreated domestic wastewater (DWW) and hospital wastewater (HWW), using high-throughput sequencing analysis and solid-phase extraction coupled to Ultra-high-performance liquid chromatography Mass Spectrometry (UHPLC-MS/MS) analysis, respectively. The physicochemical qualities of both wastewater systems were also determined. The mean concentration of antibiotics and the concentrations of Cl-, F- and PO43 were higher in HWW samples than in DWW samples. The phylum Firmicutes was dominant in DWW with a sequence coverage of 59.61% while Proteobacteria was dominant in HWW samples with a sequence coverage of 86.32%. At genus level, the genus Exiguobacterium (20.65%) and Roseomonas (67.41%) were predominant in DWW and HWW samples, respectively. Several pathogenic or opportunistic bacterial genera were detected in HWW (Enterococcus, Pseudomonas and Vibrio) and DWW (Clostridium, Klebsiella, Corynebacterium, Bordetella, Staphylocccus and Rhodococcus) samples. Functional prediction analysis indicated the presence of beta-lactam resistance, cationic antimicrobial peptide (CAMP) resistance and vancomycin resistance genes in HWW samples. The presence of these antibiotic resistance genes and cassettes were positively correlated with the presence of pathogens. These findings show the risk posed to public and environmental health by the discharge of untreated domestic and hospital wastewaters into environmental water bodies.

Taxonomic and functional analyses reveal existence of virulence and antibiotic resistance genes in beach sand bacterial populations.

Coastal sands are important natural recreational facilities that have become hotspots for tourism and economic development. However, these sands harbour diverse microbial assemblages that play a critical role in the balance between public health and ecology. In this study, targeted high-throughput sequencing analysis was used to identify sand-borne bacterial populations at four public beaches in Durban. The effect of heavy metal in shaping the distribution of bacterial metacommunities was determined using canonical correspondence analysis (CCA), while the functional gene profiles were predicted using PICRUSt2 analysis. Sequences matching those of the bacterial phylum Proteobacteria were the most abundant in all samples, followed by those of the phyla Firmicutes, Actinobacteria, Bacteroidetes, and Gemmatimonadetes. Genus-level taxonomic analysis showed the presence of 1163 bacterial genera in all samples combined. The distribution of bacterial communities was shaped by heavy metal concentrations, with the distribution of Flavobacteria, Bacteroidia, and Deltaproteobacteria influenced by Pb and Zn, while B and Cr influenced the distribution of Clostridia and Gammaproteobacteria, respectively. Identified antibiotic resistance genes included the peptidoglycan biosynthesis gene II, III, IV, and V, as well as the polymyxin resistance gene, while the virulence genes included the sitA, fimB, aerobactin synthase, and pilL gene. Our findings demonstrate that beach sand-borne bacteria are reservoirs of virulence and antibiotic resistance genes. Contamination of beach sands with heavy metals selects for both heavy metal resistance and antibiotic resistance in beach sand bacterial communities. Children and immunocompromised people engaging in recreational activities on beaches may be exposed to higher risk of infection.

Distribution and comparison of bacterial communities in HVAC systems of two university buildings: Implications for indoor air quality and public health.

The installation of HVAC systems in building is meant to enhance indoor air quality as well as increase comfort to occupants. However, HVAC systems have also become a vehicle of contamination of indoor air with potentially pathogenic microorganisms. DNA was extracted from ten HVAC filter dust samples collected from two buildings and subjected to high throughput sequencing analysis to determine the bacterial community structure. Further, the Phylogenetic Investigation of Communities by Reconstruction of Unobserved States (PICRUSt2) software was used to predict the potential functional capabilities of the bacterial communities. Sequencing analysis led to the identification of five major bacterial phyla, including Proteobacteria, Cyanobacteria, Actinobacteria, Firmicutes and Bacteroidetes. At genus level, Mycobacterium, Bacillus, Cupriavidus, Hyphomicrobium and Mesorhizobium were the most dominant. With the exception of the later two bacterial genera, the first three are potential pathogens whose presence in HVAC systems poses a significant public health risk, especially among immunocompromised individuals. Nine pathways associated with antibiotics resistance and bacterial pathogenicity were identified, including polymyxin resistance and peptidoglycan biosynthesis pathways. Further, investigation of the relationship between the detected bacterial meta-communities and predicted potential virulence factors (antibiotic resistance and pathogenic genes) led to the detection of 350 positive associations among 43 core bacteria, 2 pathogenic genes (sitA and uidA) and 14 resistance genes. Overall, the heterogeneous nature of microorganisms found in HVAC systems observed in this study shows that HVAC systems are the origin of airborne infections in indoor environments, and must be periodically cleaned and disinfected to avoid the build-up of pathogens, and the subsequent exposure of human occupants of these pathogens.

Occurrence and diversity of waterborne fungi and associated mycotoxins in treated drinking water distribution system in South Africa: implications on water quality and public health.

Despite increased public health concerns on the occurrences of potentially pathogenic/mycotoxigenic fungi in public drinking water system, dissemination of hygienically relevant fungi and their associated mycotoxins via distribution system under the dual burden of ageing infrastructure and ancillary distribution network lacking infrastructure for high-pressure water delivery systems is unknown. In this study, the diversity of fungi and occurrence of mycotoxins at 30 different points along treated piped water supply and ancillary distribution networks in Johannesburg, South Africa, were monitored for 12 months. Mycological analysis using cultural and molecular methods yielded 282 fungi belonging to phylum Ascomycota, having Aspergillus (91%), Penicillium (65%) and Trichoderma (31%) as dominant genera, with Aspergillus fumigatus, Penicillium citrinum, Purpureocillium lilacinum and Aspergillus flavus as the most prevalent species. Communal standpipe and reservoir outlets had significantly higher prevalence than other water samples. There was no strong correlation between total coliforms (r = 0.4266) and residual chlorine (r = - 0.1937), and fungal prevalence at p < 0.05. LC-MS/MS analysis detected aflatoxins B1, M1, G1 and G2 in 50, 9, 9 and 46% of water samples analysed, respectively, ranging between 0 and 3.18 ng/l. Deoxynivalenol (DON), 3-acetyl DON and 15-acetyl DON levels were between 8.4-96.1, 18.7-145.7 and 15.2-71.6 ng/l, respectively. However, the estimated average daily dose (ADD) for detected mycotoxins was below the tolerable daily intake (TDI), suggesting no toxicological risk. Presence of potentially mycotoxigenic fungi, despite the low toxicological risk, demonstrates a need for appropriate monitoring for fungi and mycotoxins in treated drinking water distribution systems for improved water quality and long-term public health assurance.

Distribution, Interaction and Functional Profiles of Epiphytic Bacterial Communities from the Rocky Intertidal Seaweeds, South Africa.

Interrelations between epiphytic bacteria and macroalgae are multifaceted and complicated, though little is known about the community structure, interaction and functions of those epiphytic bacteria. This study comprehensively characterized the epiphytic bacterial communities associated with eight different common seaweeds collected from a rocky intertidal zone on the Indian Ocean at Cape Vidal, South Africa. High-throughput sequencing analyses indicated that seaweed-associated bacterial communities were dominated by the phyla Proteobacteria, Bacteroidetes, Firmicutes, Cyanobacteria, Planctomycetes, Actinobacteria and Verrucomicrobia. Energy-dispersive X-ray (EDX) analysis showed the presence of elemental composition in the surface of examined seaweeds, in varying concentrations. Cluster analysis showed that bacterial communities of brown seaweeds (SW2 and SW4) were closely resembled those of green seaweeds (SW1) and red seaweeds (SW7) while those of brown seaweeds formed a separate branch. Predicted functional capabilities of epiphytic bacteria using PICRUSt analysis revealed abundance of genes related to metabolic and biosynthetic activities. Further important identified functional interactions included genes for bacterial chemotaxis, which could be responsible for the observed association and network of elemental-microbes interaction. The study concludes that the diversity of epiphytic bacteria on seaweed surfaces is greatly influenced by algal organic exudates as well as elemental deposits on their surfaces, which triggers chemotaxis responses from epiphytic bacteria with the requisite genes to metabolise those substrates.

Recreational water quality status of the Kidd's Beach as determined by its physicochemical and bacteriological quality parameters.

Coastal water resources are habitually exposed to indiscriminate anthropogenic pollution. However, due to their negative consequences to the public health, recreational waters require continuous monitoring for disease-causing organisms as a way of preventing ailments associated with swimming. As a result, the present study assessed the physicochemical parameters and microbial loads of water samples collected from six different sampling points on Kidd's Beach using standard analytical procedures. Generated data were analysed with One-way ANOVA and spearman correlation (at 95%). The physicochemical qualities varied as follows: pH (7.21-8.23), temperature (18.46-27.63 °C), turbidity (0-25.67 NTU), electrical conductivity (22723-62067 µS/cm), total dissolved solids (7662-31037 mg/L), and salinity (8.95-41.84 PSU). All these measured parameters were significantly different (P < 0.05) with respect to the sampling sites. Presumptive Enterococcus counts ranged from 64 - 168 CFU/100 mL of water samples. Out of 409 presumptive Enterococcus isolates obtained from the culture-based method, 67 were confirmed to be Enterococcus by PCR-techniques. From the 67 confirmed isolates, 19(E. faecalis) and 40(E. feacium) while 8(other species that were non-targeted). Findings from this study shown that Kidd's Beach water samples contain some pathogenic bacteria that pose high risk to the public health and make it to be unfit for recreational use when compared to DWAF and US EPA guidelines. Therefore, effort should be made to strictly control all activities contributing to the level of pollution in the marine environment.

Prevalence and public health implications of mycotoxigenic fungi in treated drinking water systems.

Insufficient potable water resources and poorly treated drinking water quality are the world's number one cause for preventable morbidity and mortality from water-related pathogenic microorganisms. Pathogenic microorganisms, including mycotoxigenic fungi, have been identified in treated drinking water. This paper presents a review of mycotoxigenic fungi as a health risk to the public as these fungi are responsible for allergies, cancers and opportunistic infections mainly to immunocompromised patients. The exacerbating factors contributing to fungal presence in water distribution systems, factors that lead to fungi being resistant to water treatment and treated drinking water quality legislations are also discussed. This paper provides a review on the prevalence of mycotoxigenic fungi and their implications to public health in treated drinking water, and the need for inclusion in treated drinking water quality regulations.

Cultivable bacterial diversity, physicochemical profiles, and toxicity determination of car wash effluents.

Carwash effluents contain potentially toxic chemical and microbiological pollutants which may pose public health and ecotoxicological threats if directly discharged into surface waters. This work was aimed at determining the microbiological, physicochemical, and toxicological parameters of carwash effluents. Toxicity assays were determined using whole effluent toxicity (WET) using Danio rerio and Daphnia pulex. For microbiological analysis, sample aliquots were spread plated onto R2A Agar for the isolation of heterotrophic bacteria followed by DNA extraction from axenic cultures for sequencing analysis. The pH of effluent samples lay in the alkaline range, and ranged from pH 7 to pH 10. Sample salinity ranged from 0.2 to 0.3 g/Kg. Electrical conductivity values ranged from 274 to 554 µS/cm. Concentrations of Co, Pb, and Ni were < 1 mg/L in all samples while the concentrations of Cu ranged from 0.94 to 3.8 mg/L and Zn from 1.15 to 3 mg/L. Oil and grease concentrations ranged from 5 to 24 mg/L. The concentrations of TPH-GRO were low at < 1 mg/L in all samples. All the carwash effluents were categorised as acutely toxic, with ≥ 75% mortality recorded for both test organisms within the first 24 h of exposure to the test solutions. Heterotrophic bacteria counts ranged from 2800 to 4600 CFU/100 ml. Sequencing analysis revealed that 57% of the isolates were closely related to Aeromonas species, with 43% closely related to Pseudomonas species. We conclude that carwash effluents are veritable sources of microbiological contaminants and potentially toxic chemical pollutants of public health and ecotoxicological concern.

Targeted 16S rRNA amplicon analysis reveals the diversity of bacterial communities in carwash effluents

This study aimed to analyze the bacterial diversity in carwash effluents and to determine their potential for use in microbial degradation of environmental contaminants. Nine carwash effluent samples were collected for physicochemical and bacterial community diversity analysis using multi-digital probes and 16S rRNA gene amplicon sequencing respectively. The pH of all effluent samples was neutral to slightly alkaline. Oil and grease concentrations ranged from 15.3 to 49.7 mg/L. 16S gene amplicon sequencing of the nine samples produced 45,934-sequence reads, which translated to 13 bacterial phyla, 26 classes, and 43 genera. The most dominant phyla were Proteobacteria, Bacteroidetes, Firmicutes, and Fusobacteria. Canonical correspondence analysis (CCA) showed that the distribution of the phyla Proteobacteria, Bacteroidetes, Acidobacteria, and Verrucomicrobia was influenced by the presence of oil and grease, total petroleum hydrocarbons-gasoline range organics (GRO-TPH), and metals species (Pb, Cu, and Zn). The dominant bacterial genera found in the present study were previously proven to biodegrade hydrocarbons, and their presence in carwash effluents could bode well for in situ natural bioremediation of these contaminated sites

No disponible

Targeted 16S rRNA amplicon analysis reveals the diversity of bacterial communities in carwash effluents.

This study aimed to analyze the bacterial diversity in carwash effluents and to determine their potential for use in microbial degradation of environmental contaminants. Nine carwash effluent samples were collected for physicochemical and bacterial community diversity analysis using multi-digital probes and 16S rRNA gene amplicon sequencing respectively. The pH of all effluent samples was neutral to slightly alkaline. Oil and grease concentrations ranged from 15.3 to 49.7 mg/L. 16S gene amplicon sequencing of the nine samples produced 45,934-sequence reads, which translated to 13 bacterial phyla, 26 classes, and 43 genera. The most dominant phyla were Proteobacteria, Bacteroidetes, Firmicutes, and Fusobacteria. Canonical correspondence analysis (CCA) showed that the distribution of the phyla Proteobacteria, Bacteroidetes, Acidobacteria, and Verrucomicrobia was influenced by the presence of oil and grease, total petroleum hydrocarbons-gasoline range organics (GRO-TPH), and metals species (Pb, Cu, and Zn). The dominant bacterial genera found in the present study were previously proven to biodegrade hydrocarbons, and their presence in carwash effluents could bode well for in situ natural bioremediation of these contaminated sites.

Defunct gold mine tailings are natural reservoir for unique bacterial communities revealed by high-throughput sequencing analysis.

Mine tailing dumps are arguably one of the leading sources of environmental degradation with often both public health and ecologically consequences. The present study investigated the concentration of heavy metals in gold mine tailings, and used high throughput sequencing techniques to determine the microbial community diversity of these tailings using 16S rRNA gene based amplicon sequence analysis. The concentration of detected metals and metalloids followed the order Si > Al > Fe > K > Ca > Mg. The 16S rRNA gene based sequence analysis resulted in a total of 273,398 reads across the five samples, represented among 7 major phyla, 41 classes, 77 orders, 142 families and 247 major genera. Phylum Actinobacteria was the most dominant, followed by Proteobacteria, Firmicutes, Chloroflexi, Cyanobacteria, Bacteroidetes, Acidobacteria and Planctomycetes. Redundancy analysis (RDA) and pairwise correlation analysis positively correlated the distribution of Alphaproteobacteria and Gammaproteobacteria to Al and K; Actinobacteria to Cr and Chloroflexi to Si. Negative correlations were observed in the distribution of Bacteroidetes with respect to As concentrations, Actinobacteria to Al, and Alphaproteobacteria and Gammaproteobacteria to high As and Te content of the soils. Predictive functional analysis showed the presence of putative biosynthetic and degradative pathways across the five sample sites. The study concludes that mine tailing sites harbour diverse and unique microbial assemblages with potentially biotechnologically important genes for biosynthesis and biodegradation.

Overview of Trends in the Application of Metagenomic Techniques in the Analysis of Human Enteric Viral Diversity in Africa's Environmental Regimes.

There has been an increase in the quest for metagenomics as an approach for the identification and study of the diversity of human viruses found in aquatic systems, both for their role as waterborne pathogens and as water quality indicators. In the last few years, environmental viral metagenomics has grown significantly and has enabled the identification, diversity and entire genome sequencing of viruses in environmental and clinical samples extensively. Prior to the arrival of metagenomics, traditional molecular procedures such as the polymerase chain reaction (PCR) and sequencing, were mostly used to identify and classify enteric viral species in different environmental milieu. After the advent of metagenomics, more detailed reports have emerged about the important waterborne viruses identified in wastewater treatment plant effluents and surface water. This paper provides a review of methods that have been used for the concentration, detection and identification of viral species from different environmental matrices. The review also takes into consideration where metagenomics has been explored in different African countries, as well as the limitations and challenges facing the approach. Procedures including sample processing, experimental design, sequencing technology, and bioinformatics analysis are discussed. The review concludes by summarising the current thinking and practices in the field and lays bare key issues that those venturing into this field need to consider and address.

Investigating toxic metal levels in popular edible fishes from the South Durban basin: implications for public health and food security.

Contamination of the ocean by heavy metals may have ecosystem-wide implications because they are toxic even if present in trace levels, and the relative ease of their bioaccumulation by marine organisms may affect human health, primarily through consumption of contaminated fish. We evaluated metal concentrations in six different popular edible fish species and estimated the potential health risks from consumption of contaminated fish. There was no correlation between fish length and average metal accumulation although the fish species tended to accumulate significantly more Al and Zn (P < 0.05) than any of the other metals. Significantly higher Mn concentrations were found in fish gills compared to other body parts in all fish species. Bronze seabream, Catface rockcod, and Slinger seabream had significantly higher mean Cr concentration in the liver than in either the tissues or gills. The highest concentration of Zn in fleshy tissue was in Horse mackerel (56.71 µg g-1) followed by Bronze seabream (31.07 µg g-1). Al levels ranged from 5.6 µg g-1 in Atlantic mackerel to 35.04 µg g-1 in Horse mackerel tissue while Cu and Cr concentrations were highest in the tissues of Horse mackerel (6.83 and 1.81 µg g-1, respectively) followed by Santer seabream (3.15; 1.09 µg g-1) and Bronze seabream (3.09; 1.30 µg g-1), respectively. The highest tissue concentration of Mn was detected in Bronze seabream (8.23 µg g-1) followed by Catface rockcod (6.05 µg g-1) and Slinger seabream (5.21 µg g-1) while Pb concentrations ranged from a high of 8.44 µg g-1 in Horse mackerel to 1.09 µg g-1 in Catface rockcod. However, the estimated potential health risks from fish consumption as determined by the target hazard quotient (THQ) and hazard index (HI) were significantly lower than 1, implying that metals were not present in sufficiently high quantities to be of any health and/or food and security concern in the studied fishes.

Thermophilic bacterial communities inhabiting the microbial mats of "indifferent" and chalybeate (iron-rich) thermal springs: Diversity and biotechnological analysis.

Microbial mats are occasionally reported in thermal springs and information on such mats is very scarce. In this study, microbial mats were collected from two hot springs (Brandvlei (BV) and Calitzdorp (CA)), South Africa and subjected to scanning electron microscopy (SEM) and targeted 16S rRNA gene amplicon analysis using Next Generation Sequencing (NGS). Spring water temperature was 55°C for Brandvlei and 58°C for Calitzdorp while the pH of both springs was slightly acidic, with an almost identical pH range (6.2-6.3). NGS analysis resulted in a total of 4943 reads, 517 and 736 OTUs for BV and CA at, respectively, a combined total of 14 different phyla in both samples, 88 genera in CA compared to 45 in BV and 37.64% unclassified sequences in CA compared to 27.32% recorded in BV. Dominant bacterial genera in CA microbial mat were Proteobacteria (29.19%), Bacteroidetes (9.41%), Firmicutes (9.01%), Cyanobacteria (6.89%), Actinobacteria (2.65%), Deinococcus-Thermus (2.57%), and Planctomycetes (1.94%) while the BV microbial mat was dominated by Bacteroidetes (47.3%), Deinococcus-Thermus (12.35%), Proteobacteria (7.98%), and Planctomycetes (2.97%). Scanning electron microscopy results showed the presence of microbial filaments possibly resembling cyanobacteria, coccids, rod-shaped bacteria and diatoms in both microbial mats. Dominant genera that were detected in this study have been linked to different biotechnological applications including hydrocarbon degradation, glycerol fermentation, anoxic-fermentation, dehalogenation, and biomining processes. Overall, the results of this study exhibited thermophilic bacterial community structures with high diversity in microbial mats, which have a potential for biotechnological exploitation.

Potential biotechnological capabilities of cultivable mycobiota from carwash effluents.

Urban life has created man-made extreme environments like carwashes. These environments have, however, not been sufficiently explored for mycobiota that can be sources of biotechnologically useful products, as has been the case with natural extreme environments. Using a combination of culture and molecular techniques, fungi from carwash effluents was characterized for production of lipase and cellulase enzymes, nonpolar and polar biotechnologically relevant secondary metabolites and hydrocarbon utilization. The isolated fungal strains belonged to the genera Alternaria, Cladosporium, Penicillium, Peyronellaea, Rhizopus, Spegazzinia, Trichoderma, Ulocladium and Yarrowia. Sixty-six percent (66%) of the fungal isolates were found to be able to metabolize naphthalene and benzanthracene, showing potential for application in bioremediation of hydrocarbon polluted sites. Lipase production by the isolates Penicillium sp. BPS3 (2.61 U/ml), Trichoderma sp. BPS9 (2.01 U/ml), Rhizopus sp. CAL1 (2.05 U/ml), Penicillium sp. PCW1 (2.99 U/ml) and Penicillium sp. SAS1 (2.16 U/ml) compared well with previously recorded lipase production levels by other fungi. The highest producers of cellulase were Penicillium sp. SAS1 (12.10 U/ml), Peyronella sp. CAW5 (4.49 U/ml) and Cladosporium sp. SAS3 (4.07 U/ml), although these activities were lower than previously reported levels. GC-MS analysis of the fungal secondary metabolites resulted in identification of 572 compounds, including azulene, methanamine, N-pentylidene, metoclopramide, and mepivacaine while compounds determined by UHPLC-MS included 10-undecen-1-ol, piquerol A, 10-undecyn-1-ol, cyclo(leucylprolyl) and rac-etomidate. These compounds were previously determined to have various activities including anticancer, antibacterial, antifungal, antihypertensive, antidiabetic and anti-inflammatory properties. The study demonstrated that fungi from carwash effluents are natural sources of some biotechnologically important products.

Diversity Analysis and Bioresource Characterization of Halophilic Bacteria Isolated from a South African Saltpan.

Though intensive research has been channeled towards the biotechnological applications of halophiles and other extremophilic microbes, these studies have not been, by any means, exhaustive. Saline environments still offer a vast diversity of microbes with potential to produce an array of natural products which can only be unlocked by concerted research efforts. In this study, a combination of culture and molecular approaches were employed to characterize halophilic bacteria from saltpan water samples and profile their potential biotechnological applications. Physicochemical analysis of the water samples showed that pH was alkaline (pH 8.8), with a salinity of 12.8%. 16S rRNA gene targeted amplicon analysis produced 10 bacterial phyla constituting of Bacteroidetes (30.57%), Proteobacteria (15.27%), Actinobacteria (9.05%), Planctomycetes (5.52%) and Cyanobacteria (3.18%). Eighteen strains were identified using sequencing analysis of the culturable bacterial strains. From these, the strains SP7 and SP9 were positive for cellulase production while the strains SP4, SP8 and SP22 were positive for lipase production. Quantitative enzyme assays showed moderate extracellular cellulase activity (1.95 U/mL) and lipase activity (3.71 U/mL) by the isolate SP9 and SP4 respectively. Further, of the six isolates, the isolate SP9 exhibited exploitable potential in the bioremediation of hydrocarbon pollution as demonstrated by its fairly high activity against benzanthracene (70% DCPIP reduction). Elucidation of the isolates secondary metabolites showed the production of the molecules 2,3-butanediol, hexahydro-3-(2-methylpropyl)pyrrole[1,2a]pyrazine-1,4-dione, aziridine, dimethylamine and ethyl acetate (GC-MS) and oxypurinol and 5-hydroxydecanoic acid (LC-MS), particularly by the isolate Salinivibrio sp. SP9. Overall, the study showed that the isolated halophiles can produce secondary metabolites with potential industrial and pharmaceutical application.

Synthetic extreme environments: overlooked sources of potential biotechnologically relevant microorganisms.

Synthetic extreme environments like carwash effluent tanks and drains are potential sources of biotechnologically important microorganisms and molecules which have, however, remained unexplored. Using culture- and molecular-based methods, a total of 17 bacterial isolates belonging to the genera Shewanella, Proteus, Paenibacillus, Enterobacter and Citrobacter, Aeromonas, Pseudomonas and Pantoea were identified. Hydrocarbon utilization and enzyme production screening assays showed that Aeromonas sp. CAC11, Paenibacillus sp. CAC12 and Paenibacillus sp. CAC13 and Citrobacter sp. PCW7 were able to degrade benzanthracene, naphthalene and diesel oil, Paenibacillus sp. CAC12 and Paenibacillus sp. CAC13 could produce cellulase enzyme, while Proteus sp. BPS2, Pseudomonas sp. SAS8 and Proteus sp. CAL3 could produce lipase. GC-MS analysis of bacterial secondary metabolites resulted in identification of 107 different compounds produced by Proteus sp. BPS2, Paenibacillus sp. CAC12, Pseudomonas sp. SAS8, Proteus sp. CAL3 and Paenibacillus sp. CAC13. Most of the compounds identified by both GC-MS and LC-MS have previously been determined to have antibacterial, antifungal and/or anticancer properties. Further, microbial metabolites which have previously been known to be produced only by plants or microorganisms found in natural extreme environments were also identified in this study. This research has revealed the immense bioresource potential of microorganisms inhabiting synthetic extreme environments.

An assessment of the physicochemical properties and toxicity potential of carwash effluents from professional carwash outlets in Gauteng Province, South Africa.

The assessment of the quality of carwash effluents has received scant attention as a potential source of public and environmental health hazard in South Africa as demonstrated by the lack of literature in this subject. The physicochemical quality and potential ramifications of carwash effluents on receiving waterbodies were investigated in this study. Grab effluent samples were collected from six carwash outlets in Gauteng Province of South Africa and analysed for selected physicochemical qualities including biological oxygen demand (BOD), oil and grease, total petroleum hydrocarbons-gasoline range organics (TPH-GRO), pH, dissolved oxygen (DO), total solids (TS) and total dissolved solids (TDS), electrical conductivity (EC), nutrients (nitrates, nitrites and phosphates), anionic surfactants and heavy metals (zinc [Zn], copper [Cu], lead [Pb] and chromium [Cr]). Further, the toxicity potential of the effluent samples was assessed using organisms from four trophic levels ranging from Selenastrum capricornutum (primary producer), Daphnia magna (primary consumer), Poecilia reticulata (secondary-tertiary consumer) and Vibrio fischeri (decomposer). High pollutant levels were observed in all effluents with BOD ranging from 27 ± 2.1 to 650 ± 4.9 mg/l, TDS from 362 ± 8.5 to 686 ± 8.5 mg/l, GRO-TPH from 0.01 ± 0.0 to 7.6 ± 0.2 mg/l, DO from 0.0 to 0.1 mg/l, Zn from 0.79 ± 0.08 to 20 ± 2.12 mg/l, Cu from 0.77 ± 0.03 to 13 ± 0.71 mg/l and oil and grease from 12 ± 2.8 to 43 ± 2.1 mg/l. Ammonium concentrations ranged from 0.4 ± 0.1 to 75 ± 6.4 mg/l; turbidity from 109 ± 0.7 to 4000 ± 29.7 mg/l, anionic surfactants from 1.4 ± 0.1 to 5.8 ± 0.3 mg/l and TPH from <0.01 to 7.6 mg/l. Toxicity assessment assays resulted in 100 % mortality for fish and Daphnia after 96 and 24 h, respectively, and significant bioluminescence and growth reduction in V. fischeri and algae after 15 min and 72 h, respectively. Most of the measured physicochemical parameters were in concentrations above the Environmental Management Agency (EPA) stipulated guidelines. Additionally, the effluents demonstrated acute toxicity against all four test species.